Daytona L4-135 2.2L SOHC (1984)
Engine Oil: Technical Service Bulletins
Engine - Oil Capacity Revision
Models
All 1984 Domestic Cars Equipped With Turbocharged 2.2L Engines
Subject
2.2L Turbocharged Engine Oil Fill Revision
Index
ENGINE
Date
April 23, 1984
No..
09-03-84
This TSB has been updated by TSB # 090384A, dated 4/30/84.
The engine oil fill for 1984 2.2L turbocharged engines has been increased from 4 quarts to 5 quarts. The additional quart of oil provides increased
lubrication capacity desirable for high performance operation.
The dipstick tube length was increased 11 mm in production to accommodate the additional quart of oil. The new dipstick tube can be identified by its
silvery color. A tube extension package was developed for engines already in the field built prior to January, 1984.
The mechanical dipstick service package consists of the following:
CAUTION: INSTALL THE EXTENSION PACKAGE ONLY ON CARS EQUIPPED WITH A GREY DIPSTICK TUBE.
Mechanical Dipstick PN 4342760
1 - Dipstick Tube Extension 1 - Engine Label 1 - Instruction Card for Operators Manual
Electronic Dipstick PN 4342759
1 - Dipstick Tube Extension
1 - Hose Clamp
PN 153455
1 - Engine Label 1 - Instruction Card for Operators Manual
Use the following procedure when installing the dipstick tube package:
A.
Mechanical Dipstick
1.
Remove dipstick.
2.
Clean all oil from the upper area of the dipstick tube. Apply a thin coating of Mopar Loctite Stud and Bearing Mount, PN 4318032, 1/8" below the top edge of the dipstick tube.
3.
Slide the Extension, PN 4343623, over the tube and, using a brass drift, carefully drive the extension down until it seats on the tube.
4.
Install dipstick.
5.
Add one quart of oil. Check oil level and operation of dipstick.
6.
Install the adhesive backed engine label on the oil filler cap.
7.
Place the insert for the owners manual in the lubrication section of the owners manual.
B.
Electronic Dipstick
1.
Remove dipstick.
